Used Water Well Drilling Rig 300m for Africa — How to Match Output to Groundwater?

A used 300 m water-well rig is the right choice for rural boreholes across Africa when its pullback, mud-pump and rod capacity match local geology. Expect an indicative USD 45,000–110,000 FOB Shanghai; the mud-pump condition and rod rack decide daily output more than the nameplate depth.

What Are the Core Specs and Where Does a 300m Rig Fit?

Field

Typical value on a 300m water-well rig

Max drilling depth

300 m

Pullback force

120–180 kN

Mast / derrick height

9–12 m

Mud pump

BW250 / BW320, 15–22 kW

Rod length / rack

3 m rods, 12–16 capacity

Drilling method

Mud rotary / DTH

Engine power

75–110 kW

Tooling included

Bits, rods, mud pump

A 300 m class rig covers most community and irrigation boreholes in sub-Saharan Africa. For hard-rock aquifers, add a DTH hammer and a matched compressor; for high-yield sand, rely on the mud rotary system.

How to Inspect a Used Water-Well Rig's Condition?

  • Derrick / mast: check for bend, weld repairs, and crown-block wear.
  • Mud pump: verify pressure and flow; a worn liner cuts output fast.
  • Rod rack and threads: look for bent rods and corroded threads.
  • Pullback winch: test line pull and brake holding.
  • Rotary head: confirm torque; listen for backlash.
  • Electronics / gauges: confirm hour meter and pressure gauges read true.

What Does a Used 300m Rig Cost, and What's the Export Process?

Indicative ranges by condition:

  • Reconditioned: USD 90,000–110,000
  • Working, average wear: USD 65,000–88,000
  • Project-retired: USD 45,000–62,000

Export steps: inspection video → proforma invoice → secure derrick and rods for 40HQ → lashing and booking → Shanghai export declaration → Bill of Lading. We supply export documents; import clearance in the destination country is the buyer's responsibility.

What Are the Common Pitfalls and Who Handles Customs?

  • Pitfall 1: "300m" capacity quoted but only a 200m rod set supplied.
  • Pitfall 2: Mud-pump liners worn — output drops below the aquifer demand.
  • Pitfall 3: Arrival without the buyer's import permit for drilling equipment.
  • Responsibility: seller provides export documents and honest condition reports; import duty, VAT and clearance are the buyer's scope. We do not promise "包清关 / 包税".

How We Evaluated These Rigs

We ranked water-well rigs by logged metres, third-party mud-pump and rod inspection, and a live pullback test. Each unit passed a pressure test before listing. Figures above are indicative and confirmed against the unit's inspection file.

Which Used Water-Well Rigs We Recommend (3–5 Units)

For boreholes across Africa, the 300 m-class rigs below are in stock and checked per the condition list. Prices are indicative EXW China. Each links to its live listing; full inventory: FairTradeMachinery rigs.

Model

Max depth / method

Engine / pull

Year / hours

Indicative price (EXW)

ZEGA ZGYX-420

300 m / water well

110 kW / 18 t pull

2022 / see listing

US$ 48,000–68,000

ZEGA ZGYX-452

300 m / DTH + mud

176 kW / 22 t pull

2023 / see listing

US$ 55,000–78,000

Kaishan KG420

300 m / DTH + mud

97 kW / 13 t pull

2021 / see listing

US$ 40,000–58,000

Kaishan KG940A

350 m / DTH

132 kW / 16 t pull

2017 / see listing

US$ 58,000–82,000

Kaishan KT7C

300 m / DTH + mud

140 kW / 16 t pull

2020 / see listing

US$ 52,000–74,000

FAQ

Can it reach 300m in hard rock?

With a DTH hammer and matched compressor, yes; mud rotary alone suits softer strata.

Is the mud pump included?

A BW250/BW320 pump is included unless stated.

How long to Africa?

About 30–40 days from Shanghai plus clearance.

Do you test the pump under load?

Yes, every listed rig includes a pump and pullback test video.

Does it fit a 40HQ?

The derrick secures down and rods stack inside; we send the lashing plan.

Sources

  • Nigeria Customs Service — import procedures and HS classification for water-well rigs: https://customs.gov.ng/
  • Standards Organisation of Nigeria (SON) — SONCAP conformity programme: https://son.gov.ng/
  • Freight rate reference: Q3 2026 quotations, Shanghai to Apapa, available on request.
  • FairTradeMachinery — used drill rig inventory (live models & specs): /rigs.html

Published: 2026-10-29 · Last reviewed: 2026-10-26 · Author: 【Pace 】Equipment Inspector, FairTradeMachinery

FairTradeMachinery

Вы Проектируете Видение. Мы Занимаемся Сложными Частями.

Помощь Глобальным Покупателям Получать Доступ к Более Ценным Машинам и Послепродажным Решениям.

Являясь ведущей глобальной платформой обмена подержанными машинами Китая, мы находимся на пересечении технологии IoT и B2B-коммерции. Это означает данные инвентаря в реальном времени, проверенные профили продавцов и процесс транзакций, разработанный для трансграничных покупателей, которые не всегда могут лично осмотреть машины. Количество наших пользователей в Китае превысило 1,5 миллиона, что означает, что у нас есть первый источник владельцев экскаваторов и эквивалентное количество машин. Это означает, что мы можем охватить все популярные модели и даже специфические потребности, независимо от состояния.

facebookyoutubeinstagramtiktoklinkedinreddit
Свяжитесь с нами
whatsAppЖивой чат в Whatsapp сейчас
Свяжитесь с нами
whatsAppЖивой чат в Whatsapp сейчас
Часто задаваемые вопросыFAQsWhatsAppWhatsApp